|
fancy pants
Copper Member
USA
30 Posts |
 Posted - 01/26/2009 : 06:46:45
|
I tried modding my Made in Taiwan DD-3 for the effects loop (see other threads for info on it). It didn't work so I undid the mod which was putting a wire back to the PCB and delay time knob "13" on the MIT PCB.
When I engage the pedal, it turns on but I get no delayed signal. The Direct out was disconnected but I put that back in but I'm guessing that should have no effect on the delayed signal. When the pedal is on or off I can hear a high pitched squeal. The pitch can be changed by tweaking the delay time knob.
I've gone over the pedal and nothing seems to be disconnected or messed up.
Any thoughts? |
|
DD-3 "On" but no delay....?
