my LED on my OCD does not work , no DC volts at the LED . 3PDT switch seems to work right , i removed the LED, and it works , the pedal still passes sound in by - pass mode and in the O/D mode . this one has me stumped .
You said that the Switch seems to work. Is there power at the switch? Is it the correct voltage? Does the LED have a series current limiting/voltage drop resistor? Is the resistor OK? Have you measure & checked the wires to the LED? Is the LED in the right way around polarity wise?
Did you try a different LED - both ways around? Did you check the solder joints?
Does it use a FET to switch the volts to the LED?
Was the LED working when you got it? Or has it been not working all the time?
it would help if i could find a schematic for this pedal . this one seems hard to find .
yes there is power at the switch. and its the correct voltage. the LED works out of the circuit . yes i have checked for DC voltage , no voltage to LED i have tryed a new LED , and the same results ....
no LED on a OCD ?
Posted - 07/18/2009 : 06:18:30
