Thanks. Firstly the LED doesn't seem to work. Second, when engaged, the signal sounds warbly. I haven't looked too much into it, I took it apart to see if anything obvious popped out at me. Nothing so far . . . .
And are you running it off a 12V ACA adapter? These need an ACA or can be connected as the second pedal in a daisy chain, While using the 9V PSA adapter.
Are the pots a bit old? perhaps the wiper in the pot is intermittent. Send some Pics of the Internals & lets see if all of us here can help you.
my CS-1 does the same thing. the volume will warble in and out slightly if you use a heavy setting. im certain its a problem with the pedal because the 3 other CS-1s ive owned(am i a bad person?) didnt have this problem. like i said though i only notice it with really heavy settings or if i boost my signal with something further down the chain.
my CS-1 does the same thing. the volume will warble in and out slightly if you use a heavy setting. im certain its a problem with the pedal because the 3 other CS-1s ive owned(am i a bad person?) didnt have this problem. like i said though i only notice it with really heavy settings or if i boost my signal with something further down the chain.
Hi Strato Yes you are .... you said owned ... not own..
Thanks all for the replies. I finally had a chance to work on it. The audio problem seems to have gone away with a cleaning. The LED seems to be of the "momentary" variety someone mentioned. Is this a joke, and can I modify it to work so I actually know when the effect is engaged?
CS-1 Schematic
Posted - 10/25/2007 : 18:05:11
) didnt have this problem. like i said though i only notice it with really heavy settings or if i boost my signal with something further down the chain.
